Diaphragm valves

Weirless Radial diaphragm™ valves

Weirless Radial diaphragm™ valves

Diaphragm valves - the highest quality bioprocessing valves

Bioprocessing diaphragm valves save 80% maintenance time

For over 30 years ASEPCO have been developing the highest quality diaphragm valves for aseptic processing.

We are trusted by bioprocessing engineers worldwide for developing stainless steel valve products that deliver cost savings, accelerate process and maintenance times—while reducing the risk of contamination.

Today we manufacture the aseptic processing industry’s diaphragm valve of choice.

The diaphragm seal moves independently of the shoulder seal (the seal between the inside and outside of the valve). Using a manual or pneumatic actuator, you can easily open and close the seal. The cylindrical shape of the diaphragm, when squeezed into the sealing position, holds the seal—tested to an internal water pressure of up to 300 psi (varies depending on diaphragm material and actuator type) without leakage.

When the valve is closed, the unique CIP/SIP “behind-the-seat flow path” can be created if you add a CIP or SIP port. This flow path makes it easy to steam or clean the valve while the valve is closed. This allows for validated aseptic and sterile system connections and transfers to be performed. Combined these features save time and money by reducing maintenance time, improving performance with a less restrictive flow path.

Fully traceable materials

Long-lasting surface finish

Saves you time and money

Quality you can rely on

Contamination free diaphragm valves

Challenging conventional design

The design of the basic weir-style diaphragm valve seal presents a number of issues for process engineers working in the biotechnology and pharmaceutical industry. In typical configurations, a weir in the valve body rises in a fluid path and when the valve is closed, the diaphragm meets the weir to shut off the flow. While a simple technology intended to reduce turbulence and shear, weir-style valves present a number of issues, for example in upstream processing applications they can be difficult to install, prone to leaks, and increase the potential of product contamination.

In traditional weir valves, a seal is made by placing a diaphragm between the mating faces of the valve body and actuator. This assembly is then held together with a set of nuts and bolts. The valve bodies are made from stainless steel due to its outstanding chemical compatibility outstanding corrosion resistance when exposed to repeated clean-in-place (CIP) and steam-in-place (SIP) cycles.

call our bioprocessing specialist

  • Inline diaphragm valves

    Inline diaphragm valves

    Our family of in-line Weirless Radial diaphragm valves are designed to cover a host of potential uses.

  • Tank diaphragm valves

    Tank diaphragm valves

    Our family of tank diaphragm valves are designed to minimise contamination risk, maintenance and lifetime cost.

  • Tank Sampling valves

    Tank Sampling valves

    Our family of tank sampling valves allow sampling that is truly representative of your process fluid.

  • Valve actuators

    Valve actuators

    Choose from two series of actuators to best suit your application.

  • Valve diaphragms

    Valve diaphragms

    Long-lasting, quick-change diaphragms that can be changed in seconds, without special training or tools.

  • Close-coupled aseptic connectors

    Close-coupled aseptic connectors

    Our family of close-coupled connectors are designed to connect flush-mounted probes, instruments, and valves to tanks or inline tubing.

ASEPCO Weirless Radial diaphragm valves

Download now

  • Find a product

  • Find a local contact

  • Help and advice

    For help or advice please contact us on:

    Tel: +1 978 658 6168 and Toll free +1 800 282-8823

    You can also send us an email or find your nearest distributor